Jet mill (jet mill) is an important equipment of superfine grinding, especially widely used in non metallic minerals and chemical raw materials of ultrafine grinding, solid content of products depends on the size limit of mixed gas stream, and inversely proportional to the unit energy consumption. In addition to fine particle size, the airflow pulverization product has the characteristics of narrow particle size distribution, smooth particle surface, regular particle shape, high purity, high activity and good dispersion. The compressed gas adiabatic expansion of Joule Thomson cooling effect in the grinding process, so it is also suitable for low melting point, heat sensitive materials of superfine grinding. Therefore, the requirements for the air compressor has become increasingly apparent, air mill (air mill) with the advantages of air compressor will be highlighted.

A lot of air compressors have run out of oil, in the actual process, found that most of the complaints are not caused by the quality of the oil problem. So, in addition to oil quality problems, what are the reasons leading to oil run? Our air compressor engineers in practice summed up a number of situations will also lead to the reasons for running oil, and below to share with you.

The air compressor is the main part of the air source device. It is the device that converts the mechanical energy of the prime mover (usually the motor) into the pressure energy of the air. It is the pressure generating device of compressed air.

01 　　 Do a good job of cleaning the air compressor equipment. 　　02 　　 Perform a manual exhaust test on the safety valve of the gas storage tank regularly (weekly) to ensure the safety and effectiveness of the safety valve. 　　03 　　The operator must be specially trained before proceeding. 　　04 　　 The air compressor should be parked in a place away from steam, gas and dust. The intake pipe should be equipped with a filter device. 　　05 　　 Always keep the outside of the gas tank clean. 　　06 　　When cleaning the radiating fins, do not use burning methods to remove oil from the pipeline. 　　07 　　 When the air compressor is stopped, the exhaust valve of the air storage tank should be gradually opened, the pressure should be slowly reduced, and the engine speed should be reduced accordingly. 　　08 　　 Before starting the air compressor, check and prepare as required, and pay attention to opening all the valves of the air storage tank. 　　09 　　 During the operation of the air compressor, pay attention to the meter readings (especially the barometer readings) at any time, and listen to the sounds of various parts. If an abnormal situation is found, it should be shut down immediately for inspection.

In December 3, 2016, air compressor industry hero (Chongqing Railway Station) was held at the Carlton Hotel in Chongqing city. The meeting was organized by Ding Li (Shanghai) Media Co., Ltd., Sichuan compressor association. Meeting the same day, heroes will gather guests scene, the scene unusual hot. Both the scene from the enterprise doer doubts, and from the school teacher's devotion to share